October 24, 2012

(No) Fun with Stripes

I wanted to get some practice with my overlocker/cover machine, which I had intentionally bought to sew knit fabrics with. So I bought some jersey fabrics and made some t-shirts, in some sort of "mass production". I used pattern no. 112 from burdastyle magazine 2/2010.

I started with a t-shirt with stripes...


did you see the iron-on shark on it? The blurry blue color reminds me of water, and I had this iron-on motif lying around, so I applied it to the t-shirt, just for fun.

There was some fabric left, quite enough to make a sweater for little T., the baby son of a friend of mine.


Then I made another striped t-shirt, which turned out to be better than the first one (unfortunately, it came out a little bit too short, but that's not a problem, I just have to make a skirt to go with it).


Then I made a t-shirt without stripes...


(I'm not too sure about that fabric pattern and colors, but at least it is comfortable to wear at home.)

... and one more sweater for little T. (I couldn't resist buying this cute fabric with those little owls).


The next one is one of my favorites!


And one more with stripes... at this time I was already a bit bored by the pattern, and so I didn't care anymore about matching the stripes.


The last one with stripes, at least it isn't blue like all the others!


It's pretty cool to wear self-made t-shirts with stripes. But that's it. I was pulling my hair out when I did the neckline bindings. I used the cover mode of my overlocker with a chain stitch.

First, the machine used to skip stitches every few inches. Which is really bad because the chains on the back side of the seam are not properly linked, to the seam will probably open one day.


I could solve this problem by using a brand new, special cover stitch needle.
But still, I find that binding necklines is not easy at all. Sometimes the whole neckline stretched out, but there are also shirts where the neckline is slightly gathered under the binding. Even when I just added a fabric stripe to turn it in. And the overlocker seems to have problems crossing thicker parts with more than two fabric layers.


For the orange shirt, I wanted to apply some real cuff fabric, and I did, but it stood from the neckline in a really weird way, so I turned the whole thing to the inside of the shirt and now it looks better. Still, this isn't what the plan was!


The blue-pink shirt came out the best concerning the neckline.


But still, the seam is wonky and not really nice. And the stripes are not matching at all.

This was another problem I struggled with: I didn't get the stripes to match perfectly. They were all nicely pinned in place, but under the foot of the overlocker, the lower fabric layer somehow goes faster, and everything is shifting. It was the same with the differential feed turned off. And it wasn't much better when I hand basted the seams first.

Oh well, at least it's only t-shirts! I guess it will go better with more practice. But I think that for the next project, I will return to sewing nice and easy-to-handle wool fabrics!

3 comments:

  1. Marie,'ve sewn many shirts!!. These are the first and knowing your new machine!
    Sure that you leave the following phenomenal!.
    Besitos

    ReplyDelete
  2. Wow, you've made so many! Good luck with making your machine behave. I know how frustrating that can be!
    I wonder if your necklines are done the same way as the Renfrew top from Sewaholic (the only knit top I've made).
    I think it's different. It's hard to explain..

    Anyway these are so cute. I love stripes! :)

    ReplyDelete
  3. Lovely shirts you made there! And I love the way you used your leftover fabric. Very cool!
    I found problems too, when sewing the neckline of a ranglan sleeve.

    ReplyDelete

Related Posts Plugin for WordPress, Blogger...